Valken Rechargeable Combat Stock

Valken Item Number/SKU: 62883
$59.95

{"custitem_sc_pdp_tab_videos":"","custitem_ns_pr_item_attributes":"&nbsp;","isonline":true,"ispurchasable":true,"custitem_ns_pr_attributes_rating":"","stockdescription":"","storedetaileddescription":"<iframe width=\"560\" height=\"315\" src=\"https://www.youtube.com/embed/RcpMlyMauJE\" frameborder=\"0\" allowfullscreen></iframe>\r\n<br>\r\n<hr>\r\n<br>\r\n\r\n<b>Rechargeable Combat Stock </b>\r\n\r\n<b>FEATURES\u0003:</b><li>Designed for a rear wired Airsoft Rifle\u0003</li>\r\n<li>6 position retractable stock</li>\r\n<li>Mil Spec buffer tube compatible </li>\u0003\r\n<li>Sling attachment point\u0003</li>\r\n<li>Accepts NiMH 8.4v or 9.6v Nunchuck batteries</li> \r\n<li>Tamiya style battery connection</li>\r\n<li>Protection overcharging board</li>\r\n<li>Blade Fuse - 30 amp \u0003</li>\r\n<li>Battery not included \u0003</li>\r\n<br>\r\n<br>\r\n<b>WARNING:</b>\u0003\u0003\r\nNOT Compatible with Li Po or Li Fe Batteries\u0003 \r\n<br>\r\n<br>\r\n\r\n<b>R.C.S. Rechargeable Combat Stock Installation </b><br>\r\n\r\n<b>Pre-Install Preparation</b>\r\n<li>Remove the OEM stock.</li>\r\n<li>Remove the buffer tube mounting screw in bottom of the tube.</li>\r\n<li>Remove buffer tube. </li>\r\n<li>Disconnect the quick connector wires from the wire leads coming from the back of the rifle.\u0003\u0003R.C.S. Installation</li>\r\n<li>Install the R.C.S. stock body onto the buffer tube. </li>\r\n<li>Using a small flat screwdriver, lift the short spring pin. </li>\r\n<li>Slide the R.C.S. stock body all the way onto the buffer tube.</li>\r\n<li>Remove the three screws from the butt plate.</li>\r\n<li>Remove the butt plate and the back cap that holds the PCB/Fuse holder.</li>\r\n<li>Feed the quick connector wires through the buffer tube.</li>\r\n<li>Connect the quick connector wires to the wire leads coming from the back of \u0003the rifle.</li>\r\n<li>Reinstall the buffer tube with the R.C.S. stock body mounted. </li>\r\n<li>Carefully reinstall the buffer tube mounting screw.</li>\r\n<br><br>\r\n\u0003<b>Battery Installation</b>\r\n<li>Place the 9.6v or 8.4v NiMH butterfly type battery into the stock’s back slots on \u0003either side of the buffer tube. </li>\r\n<li>Connect the mini Tamiya connector from the battery to the R.C.S. mini Tamiya \u0003connector.</li>\r\n<li>Fully retract the R.C.S. stock. </li>\r\n<li>Gently push the excess wire into the buffer tube. Make sure the Tamiya \u0003connection stays on top and goes in last.</li>\r\n<li>Insert the back cap that holds the PCB/Fuse holder.</li>\r\n<li>Extend and retract the R.C.S. to ensure free movement.</li>\r\n<li>Mount the butt plate and reinstall the three screws. </li>\r\n<br><br>\r\n R.C.S. installation is complete. The R.C.S. and is now ready to be charged \u0003using the charging harness or the Valken Stock Doc.\r\n<br><br>\r\n<b>Charging Options</b><br>\u0003\r\n<li>Valken Stock Doc</li>\r\n<li>The most simple option is to use the Valken Stock Doc, gently drop the R.C.S. stock \u0003into the Stock Doc.\u0003\u0003</li>\r\n<br><br>\r\n<b>Smart Charger</b>\r\n<li>Connect the included charging harness into the mini tamiya connector of the smart \u0003charger. Plug the charging harness into the rear of the R.C.S. Stock. </li>\r\n<br><br>\r\n<b>Video Installation</b> \r\n\u0003airsoft.valken.com/rcs\r\n<br><br>\r\n<b>Compatibility\u0003</b>\r\n<li>Mil Spec Buffer Tube</li>\r\n<li>G&amp;G</li>\r\n<li>Top Tech</li>\r\n<li>VFC</li>\r\n<li>G&amp;P</li>\r\n<li>ARES Proline</li>\r\n<li>JG</li>\r\n<li>SRC Gen.2/Gen.3</li>\r\n<li>KWA/KSC</li>\r\n<li>CA</li>\r\n<br><br>\r\n<b>Connection-Rear Wired AEG</b>\r\n<li>G&amp;G</li>\r\n<li>Top Tech</li>\r\n<br><br>\r\n\u0003<b>With Slight Modification or Adaptor</b>\r\n<li>VFC</li>\r\n<li>G&amp;P</li>\r\n<li>ARES Proline</li>\r\n<li>JG</li>\r\n<li>SRC Gen.2/Gen.3</li>\r\n<li>KWA/KSC</li>\r\n<li>CA</li>\r\n<br><br>\r\n<b>Safety</b>\u0003\r\n<li>Do not alter or modify the R.C.S. unless you are a certified technician, modifications can affect performance and damage the R.C.S.</li>\r\n<li>Do not leave charging cycle unattended</li>\r\n<li>DO NOT use LiPo or LiFe batteries in the R.C.S. it is for use with only NiMh 8.4v and 9.6v batteries</li>\r\n","itemimages_detail":{"media":{"urls":[{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-1.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-2.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-3.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-4.png"}]}},"onlinecustomerprice_detail":{"onlinecustomerprice_formatted":"$59.95","onlinecustomerprice":59.95},"custitem_ns_pr_rating_by_rate":"","internalid":11983,"featureddescription":"","outofstockmessage":"","itemoptions_detail":{"fields":[{"internalid":"custcol_item_number","label":"Item Number","type":"textarea"},{"internalid":"custcol_160image_showin_shopping_cart","label":"160 Image to Show in Shopping Cart","type":"url"},{"internalid":"custcol_disc_percent","label":"Disc Percent","type":"integer"},{"internalid":"custcol_disc_rate","label":"Discounted Rate","type":"currency"}],"parentid":5535},"storedescription":"Item #: 62883","pricelevel1_formatted":"$59.95","vendorname":"62883","isinactive":false,"isinstock":true,"metataghtml":"","quantityavailable_detail":{"quantityavailable":21,"locations":[{"internalid":1,"quantityavailable":21}]},"onlinecustomerprice":59.95,"pagetitle2":"Valken Rechargeable Combat Stock","custitem_features":"","itemid":"Marker Parts - Rechargeable Combat Stock","isbackorderable":true,"storedescription2":"Item #: 62883","showoutofstockmessage":false,"outofstockbehavior":"Allow back orders but display out-of-stock message","itemtype":"InvtPart","quantityavailable":21,"displayname":"Marker Parts - Rechargeable Combat Stock","storedisplayname2":"Valken Rechargeable Combat Stock","pricelevel1":59.95,"pagetitle":"","urlcomponent":"Marker-Parts-Rechargeable-Combat-Stock","facets":[{"id":"category","values":[{"url":"Home","id":"Home","values":[{"url":"Airsoft","id":"Home/us-airsoft","values":[{"url":"Parts / Upgrades","id":"Home/us-airsoft/us-airsoft-parts-upgrades","values":[{"url":"Stocks","id":"Home/us-airsoft/us-airsoft-parts-upgrades/us-airsoft-parts-upgrades-stocks","values":[]}]}]}]}]},{"id":"custitem3","url":"custitem3","values":[]},{"id":"custitem_valken_facet_color","url":"custitem_valken_facet_color","values":[]},{"id":"custitem_valken_facet_pattern","url":"custitem_valken_facet_pattern","values":[]},{"id":"custitemfacet_brand","url":"custitemfacet_brand","values":[{"url":"Valken","label":"Valken"}]},{"id":"onlinecustomerprice","url":"pricelevel5","values":[{"url":"59.95","label":"59.95"}],"min":59.95,"max":59.95,"ranges":[]}],"_optionsDetails":{"fields":[{"internalid":"custcol_item_number","label":"Item Number","type":"textarea"},{"internalid":"custcol_160image_showin_shopping_cart","label":"160 Image to Show in Shopping Cart","type":"url"},{"internalid":"custcol_disc_percent","label":"Disc Percent","type":"integer"},{"internalid":"custcol_disc_rate","label":"Discounted Rate","type":"currency"}],"parentid":5535},"_matrixParent":{},"_matrixChilds":[],"_minimumQuantity":1,"quantity":1,"_pageTitle":"Valken Rechargeable Combat Stock","_pageHeader":"Valken Rechargeable Combat Stock","_url":"/Marker-Parts-Rechargeable-Combat-Stock","_name":"Valken Rechargeable Combat Stock","_images":[{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-1.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-2.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-3.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-4.png"}],"_priceDetails":{"onlinecustomerprice_formatted":"$59.95","onlinecustomerprice":59.95},"_comparePriceAgainst":59.95,"_comparePriceAgainstFormated":"$59.95","_itemType":"InvtPart","_isPurchasable":true,"_sku":"62883","_isInStock":true,"_availableLocations":[],"_stock":21,"_outOfStockMessage":"","_showOutOfStockMessage":false,"_inStockMessage":"In Stock","_showInStockMessage":false,"_stockDescription":"","_showStockDescription":true,"_stockDescriptionClass":"stock-description-"}

$59.95

{"custitem_sc_pdp_tab_videos":"","custitem_ns_pr_item_attributes":"&nbsp;","isonline":true,"ispurchasable":true,"custitem_ns_pr_attributes_rating":"","stockdescription":"","storedetaileddescription":"<iframe width=\"560\" height=\"315\" src=\"https://www.youtube.com/embed/RcpMlyMauJE\" frameborder=\"0\" allowfullscreen></iframe>\r\n<br>\r\n<hr>\r\n<br>\r\n\r\n<b>Rechargeable Combat Stock </b>\r\n\r\n<b>FEATURES\u0003:</b><li>Designed for a rear wired Airsoft Rifle\u0003</li>\r\n<li>6 position retractable stock</li>\r\n<li>Mil Spec buffer tube compatible </li>\u0003\r\n<li>Sling attachment point\u0003</li>\r\n<li>Accepts NiMH 8.4v or 9.6v Nunchuck batteries</li> \r\n<li>Tamiya style battery connection</li>\r\n<li>Protection overcharging board</li>\r\n<li>Blade Fuse - 30 amp \u0003</li>\r\n<li>Battery not included \u0003</li>\r\n<br>\r\n<br>\r\n<b>WARNING:</b>\u0003\u0003\r\nNOT Compatible with Li Po or Li Fe Batteries\u0003 \r\n<br>\r\n<br>\r\n\r\n<b>R.C.S. Rechargeable Combat Stock Installation </b><br>\r\n\r\n<b>Pre-Install Preparation</b>\r\n<li>Remove the OEM stock.</li>\r\n<li>Remove the buffer tube mounting screw in bottom of the tube.</li>\r\n<li>Remove buffer tube. </li>\r\n<li>Disconnect the quick connector wires from the wire leads coming from the back of the rifle.\u0003\u0003R.C.S. Installation</li>\r\n<li>Install the R.C.S. stock body onto the buffer tube. </li>\r\n<li>Using a small flat screwdriver, lift the short spring pin. </li>\r\n<li>Slide the R.C.S. stock body all the way onto the buffer tube.</li>\r\n<li>Remove the three screws from the butt plate.</li>\r\n<li>Remove the butt plate and the back cap that holds the PCB/Fuse holder.</li>\r\n<li>Feed the quick connector wires through the buffer tube.</li>\r\n<li>Connect the quick connector wires to the wire leads coming from the back of \u0003the rifle.</li>\r\n<li>Reinstall the buffer tube with the R.C.S. stock body mounted. </li>\r\n<li>Carefully reinstall the buffer tube mounting screw.</li>\r\n<br><br>\r\n\u0003<b>Battery Installation</b>\r\n<li>Place the 9.6v or 8.4v NiMH butterfly type battery into the stock’s back slots on \u0003either side of the buffer tube. </li>\r\n<li>Connect the mini Tamiya connector from the battery to the R.C.S. mini Tamiya \u0003connector.</li>\r\n<li>Fully retract the R.C.S. stock. </li>\r\n<li>Gently push the excess wire into the buffer tube. Make sure the Tamiya \u0003connection stays on top and goes in last.</li>\r\n<li>Insert the back cap that holds the PCB/Fuse holder.</li>\r\n<li>Extend and retract the R.C.S. to ensure free movement.</li>\r\n<li>Mount the butt plate and reinstall the three screws. </li>\r\n<br><br>\r\n R.C.S. installation is complete. The R.C.S. and is now ready to be charged \u0003using the charging harness or the Valken Stock Doc.\r\n<br><br>\r\n<b>Charging Options</b><br>\u0003\r\n<li>Valken Stock Doc</li>\r\n<li>The most simple option is to use the Valken Stock Doc, gently drop the R.C.S. stock \u0003into the Stock Doc.\u0003\u0003</li>\r\n<br><br>\r\n<b>Smart Charger</b>\r\n<li>Connect the included charging harness into the mini tamiya connector of the smart \u0003charger. Plug the charging harness into the rear of the R.C.S. Stock. </li>\r\n<br><br>\r\n<b>Video Installation</b> \r\n\u0003airsoft.valken.com/rcs\r\n<br><br>\r\n<b>Compatibility\u0003</b>\r\n<li>Mil Spec Buffer Tube</li>\r\n<li>G&amp;G</li>\r\n<li>Top Tech</li>\r\n<li>VFC</li>\r\n<li>G&amp;P</li>\r\n<li>ARES Proline</li>\r\n<li>JG</li>\r\n<li>SRC Gen.2/Gen.3</li>\r\n<li>KWA/KSC</li>\r\n<li>CA</li>\r\n<br><br>\r\n<b>Connection-Rear Wired AEG</b>\r\n<li>G&amp;G</li>\r\n<li>Top Tech</li>\r\n<br><br>\r\n\u0003<b>With Slight Modification or Adaptor</b>\r\n<li>VFC</li>\r\n<li>G&amp;P</li>\r\n<li>ARES Proline</li>\r\n<li>JG</li>\r\n<li>SRC Gen.2/Gen.3</li>\r\n<li>KWA/KSC</li>\r\n<li>CA</li>\r\n<br><br>\r\n<b>Safety</b>\u0003\r\n<li>Do not alter or modify the R.C.S. unless you are a certified technician, modifications can affect performance and damage the R.C.S.</li>\r\n<li>Do not leave charging cycle unattended</li>\r\n<li>DO NOT use LiPo or LiFe batteries in the R.C.S. it is for use with only NiMh 8.4v and 9.6v batteries</li>\r\n","itemimages_detail":{"media":{"urls":[{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-1.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-2.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-3.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-4.png"}]}},"onlinecustomerprice_detail":{"onlinecustomerprice_formatted":"$59.95","onlinecustomerprice":59.95},"custitem_ns_pr_rating_by_rate":"","internalid":11983,"featureddescription":"","outofstockmessage":"","itemoptions_detail":{"fields":[{"internalid":"custcol_item_number","label":"Item Number","type":"textarea"},{"internalid":"custcol_160image_showin_shopping_cart","label":"160 Image to Show in Shopping Cart","type":"url"},{"internalid":"custcol_disc_percent","label":"Disc Percent","type":"integer"},{"internalid":"custcol_disc_rate","label":"Discounted Rate","type":"currency"}],"parentid":5535},"storedescription":"Item #: 62883","pricelevel1_formatted":"$59.95","vendorname":"62883","isinactive":false,"isinstock":true,"metataghtml":"","quantityavailable_detail":{"quantityavailable":21,"locations":[{"internalid":1,"quantityavailable":21}]},"onlinecustomerprice":59.95,"pagetitle2":"Valken Rechargeable Combat Stock","custitem_features":"","itemid":"Marker Parts - Rechargeable Combat Stock","isbackorderable":true,"storedescription2":"Item #: 62883","showoutofstockmessage":false,"outofstockbehavior":"Allow back orders but display out-of-stock message","itemtype":"InvtPart","quantityavailable":21,"displayname":"Marker Parts - Rechargeable Combat Stock","storedisplayname2":"Valken Rechargeable Combat Stock","pricelevel1":59.95,"pagetitle":"","urlcomponent":"Marker-Parts-Rechargeable-Combat-Stock","facets":[{"id":"category","values":[{"url":"Home","id":"Home","values":[{"url":"Airsoft","id":"Home/us-airsoft","values":[{"url":"Parts / Upgrades","id":"Home/us-airsoft/us-airsoft-parts-upgrades","values":[{"url":"Stocks","id":"Home/us-airsoft/us-airsoft-parts-upgrades/us-airsoft-parts-upgrades-stocks","values":[]}]}]}]}]},{"id":"custitem3","url":"custitem3","values":[]},{"id":"custitem_valken_facet_color","url":"custitem_valken_facet_color","values":[]},{"id":"custitem_valken_facet_pattern","url":"custitem_valken_facet_pattern","values":[]},{"id":"custitemfacet_brand","url":"custitemfacet_brand","values":[{"url":"Valken","label":"Valken"}]},{"id":"onlinecustomerprice","url":"pricelevel5","values":[{"url":"59.95","label":"59.95"}],"min":59.95,"max":59.95,"ranges":[]}],"_optionsDetails":{"fields":[{"internalid":"custcol_item_number","label":"Item Number","type":"textarea"},{"internalid":"custcol_160image_showin_shopping_cart","label":"160 Image to Show in Shopping Cart","type":"url"},{"internalid":"custcol_disc_percent","label":"Disc Percent","type":"integer"},{"internalid":"custcol_disc_rate","label":"Discounted Rate","type":"currency"}],"parentid":5535},"_matrixParent":{},"_matrixChilds":[],"_minimumQuantity":1,"quantity":1,"_pageTitle":"Valken Rechargeable Combat Stock","_pageHeader":"Valken Rechargeable Combat Stock","_url":"/Marker-Parts-Rechargeable-Combat-Stock","_name":"Valken Rechargeable Combat Stock","_images":[{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-1.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-2.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-3.png"},{"altimagetext":"","url":"http://www.valken.com/assets/images/products/Marker-Parts-Rechargeable-Combat-Stock_media-4.png"}],"_priceDetails":{"onlinecustomerprice_formatted":"$59.95","onlinecustomerprice":59.95},"_comparePriceAgainst":59.95,"_comparePriceAgainstFormated":"$59.95","_itemType":"InvtPart","_isPurchasable":true,"_sku":"62883","_isInStock":true,"_availableLocations":[],"_stock":21,"_outOfStockMessage":"","_showOutOfStockMessage":false,"_inStockMessage":"In Stock","_showInStockMessage":false,"_stockDescription":"","_showStockDescription":true,"_stockDescriptionClass":"stock-description-"}


Details




Rechargeable Combat Stock FEATURES:
  • Designed for a rear wired Airsoft Rifle
  • 6 position retractable stock
  • Mil Spec buffer tube compatible
  • 
  • Sling attachment point
  • Accepts NiMH 8.4v or 9.6v Nunchuck batteries
  • Tamiya style battery connection
  • Protection overcharging board
  • Blade Fuse - 30 amp 
  • Battery not included 


  • WARNING: NOT Compatible with Li Po or Li Fe Batteries

    R.C.S. Rechargeable Combat Stock Installation
    Pre-Install Preparation
  • Remove the OEM stock.
  • Remove the buffer tube mounting screw in bottom of the tube.
  • Remove buffer tube.
  • Disconnect the quick connector wires from the wire leads coming from the back of the rifle.R.C.S. Installation
  • Install the R.C.S. stock body onto the buffer tube.
  • Using a small flat screwdriver, lift the short spring pin.
  • Slide the R.C.S. stock body all the way onto the buffer tube.
  • Remove the three screws from the butt plate.
  • Remove the butt plate and the back cap that holds the PCB/Fuse holder.
  • Feed the quick connector wires through the buffer tube.
  • Connect the quick connector wires to the wire leads coming from the back of the rifle.
  • Reinstall the buffer tube with the R.C.S. stock body mounted.
  • Carefully reinstall the buffer tube mounting screw.


  • Battery Installation
  • Place the 9.6v or 8.4v NiMH butterfly type battery into the stock’s back slots on either side of the buffer tube.
  • Connect the mini Tamiya connector from the battery to the R.C.S. mini Tamiya connector.
  • Fully retract the R.C.S. stock.
  • Gently push the excess wire into the buffer tube. Make sure the Tamiya connection stays on top and goes in last.
  • Insert the back cap that holds the PCB/Fuse holder.
  • Extend and retract the R.C.S. to ensure free movement.
  • Mount the butt plate and reinstall the three screws.


  • R.C.S. installation is complete. The R.C.S. and is now ready to be charged using the charging harness or the Valken Stock Doc.

    Charging Options
    
  • Valken Stock Doc
  • The most simple option is to use the Valken Stock Doc, gently drop the R.C.S. stock into the Stock Doc.


  • Smart Charger
  • Connect the included charging harness into the mini tamiya connector of the smart charger. Plug the charging harness into the rear of the R.C.S. Stock.


  • Video Installation airsoft.valken.com/rcs

    Compatibility
  • Mil Spec Buffer Tube
  • G&G
  • Top Tech
  • VFC
  • G&P
  • ARES Proline
  • JG
  • SRC Gen.2/Gen.3
  • KWA/KSC
  • CA


  • Connection-Rear Wired AEG
  • G&G
  • Top Tech


  • With Slight Modification or Adaptor
  • VFC
  • G&P
  • ARES Proline
  • JG
  • SRC Gen.2/Gen.3
  • KWA/KSC
  • CA


  • Safety
  • Do not alter or modify the R.C.S. unless you are a certified technician, modifications can affect performance and damage the R.C.S.
  • Do not leave charging cycle unattended
  • DO NOT use LiPo or LiFe batteries in the R.C.S. it is for use with only NiMh 8.4v and 9.6v batteries

  • Ratings & Reviews

    No reviews available

    Be the first to Write a Review