The Valken 2-3 Cell LiPo Compact Balancing Smart Charger is a balancing smart charger for LiPo airsoft batteries. The LiPo charger comes with a power cord, and charges LiPo battery packs at 1A through 3-pin, or 4-pin charging ports. Balance ports support the 7.4v, and 11.1v, which smart balances each individual cell to ensure maximum life. They also automatically stop charging at a full charge.
We recommend using our Valken Lithium Battery Charging and Travel Safety Sack
and Battery Tester
to safely test and charge all lithium batteries.
Always charge your new battery fully before its first use.
Connect the DC power or AC adapter to the proper Lipo charger.
Plug the charger's power into an appropriate wall outlet.
Three power LED lights on the charger will turn from red to green, which indicates that the charger is in good working order.
Connect the battery pack to the charger with the small XH charging connector and make sure the polarity is connected in the right way. Then charging will start automatically.
The power LED lights on the charger will turn red and charging begins. Note: once the charging of a cell is done, the corresponding power LED will turn green.
Place battery inside a Lithium Battery Safety Bag while charging.
Battery pack is at full charge when all power LED lights have turned green.
Disconnect battery pack from charger before unplugging the charger from the wall outlet.
Terminate charging immediately when any malfunction is observed.