Valken 8.4V-9.6V NiMh Smart Charger (USA)

48290

$17.95

This product is currently unavailable for purchase.

OUT OF STOCK

View Full Details

Description
The Valken 8.4v - 9.6v NiMh airsoft battery charger is a smart charger for NiMh or NiCd batteries with 7-8 cells. The NiMh battery charger is easy to use, and charges airsoft battery packs at 600mA with a mini Tamiya connector. The airsoft battery charger plugs directly into a wall outlet, and a status LED lets you know when the battery pack is fully charged. The NiMh charger also comes with Delta Peak Detection, which automatically stops charging at a full charge, and switches to a trickle current of 200mA after 5 hours. They also come with reverse polarity and short circuit protection built in.

Valken 8.4v-9.6v NiMh Smart Charger Safety Manual

IMPORTANT INFORMATION:
Watch the 3 safety videos below if you are unfamiliar or new to charging airsoft batteries for safe and proper care, maintenance, and use of all type of airsoft battery packs and chargers.

OPERATION INSTRUCTIONS
Always charge your new battery fully before its first use.
Connect the DC power or AC adapter to the proper NiMh charger.
Plug the charger's power into an appropriate wall outlet.
Connect the battery pack to the charger with the small Tamiya connector and make sure the polarity is connected in the right way. Then charging will start automatically.
After being connected correctly to the battery pack, the power LED will turn red, indicating that charging has begun.
Battery pack is at full charge when power LED turns green.
Disconnect battery pack from charger before unplugging the charger from the wall outlet.

WARNING
Do not charge any Lithium battery packs with this NiMh charger.
Never leave the charger unattended while it is connected to power supply.
Never attempt to charge more than 1 battery pack simultaneously from the same charger.
Only use the appropriate charger with your NiMh batteries. Use of other chargers can result in fire, personal injury and property damage.
Never leave batteries and chargers unattended when in use. Always remove the battery from the charger or airsoft gun when not in use.
Always charge batteries in a safe area, on a stable non-flammable, heat-resistant, and non-conductive surface away from other flammable items. Unsafe charging surfaces include, but not limited to, car seats, carpet, bed, or something similar that can heat up quickly and melt or catch fire.
Never allow your battery and charger to be dislodged or fall during charging as this can result in fire, personal injury and property damage.
Never alter, modify or open your battery pack or charger.
Terminate charging immediately when any malfunction is observed.
Cancer and Reproductive Harm - www.P65Warnings.ca.gov 

CAUTION
Before charging complete a visual inspection of your battery and charger. At the sign of any damage or short circuit, do not use.
Never expose batteries to temperatures higher than 160 degrees F.
Never leave your battery in a closed vehicle.
Never use any charger accessory, such as wires extensions, adapters, or multi-connector adapters, that were not included with your charger from the factory. They may not be compatible with your charger and result in fire, property damage, or personal injury.
Any service or modification of any battery must be completed by a qualified dealer or original manufacturer.
Always keep your battery in a safe secure location to prevent damage during transport or storage.
Always keep batteries away from liquids.
Always keep batteries out of the reach of children.

Don't charge the following types of batteries:
Lead Acid battery or VRLA.
LiPo, LiFe, or Li-ion battery packs.
Non-rechargeable battery (explosion hazard)
Faulty or damaged battery.
Battery pack which consists of different types of cells.
Any other type of battery except for NiMh battery packs.


Features
  • Automatically stops charging at battery's peak
  • For 8.4v and 9.6v NiMh / NiCd Batteries
  • Charges battery packs from 1000mAh to 5000mAh
  • Small Tamiya Connector
  • Status LED
  • For NiMh / NiCd Batteries ONLY
  • Specifications
  • Compatibility: 8.4v and 9.6v NiMH Batteries (7-8 Cells)
  • Connector Type: Small Tamiya
  • Charge Rate: 600mA (Trickle Current of 200mA)
  • Input Voltage: 100-240v AC
  • Dimensions: 75mm x 52mm x 28mm
  • Material: Polymer Case
  • Package Includes: Charger and Manual
  • Videos

    Top of Page