Valken NiMH 9.6V 2200mAh Split Airsoft Battery (Small Tamiya)

95843

$32.95
The Valken NiMh 9.6v 2200mAh Split Type airsoft battery is made from high performance 1.2v cells. The NiMh nunchuck battery is also easy to charge, and does not require discharging like NiCd battery packs. The NiMh nunchuck battery has a long recharge life cycle, and consistent, reliable power output. They are built with 16AWG wiring and include a mini Tamiya connector.
 
 

 
IMPORTANT INFORMATION:
Watch the 3 safety videos below if you are unfamiliar or new to charging airsoft batteries for safe and proper care, maintenance, and use of all type of airsoft battery packs and chargers.
 
OPERATION INSTRUCTIONS
Always charge your new battery fully before its first use.
Read and follow the instructions of your NiMh charger thoroughly.
Always plug your charger into an appropriate power source before attaching your battery.
 
 
WARNING
Do not charge any NiMn battery packs with a LiPo/Li-ion charger.
Never leave the charger unattended while it is connected to power supply.
Never attempt to charge more than 1 battery pack simultaneously from the same charger.
Only use the appropriate charger with your NiMh batteries. Use of other chargers can result in fire, personal injury and property damage.
Never leave batteries and chargers unattended when in use. Always remove the battery from the charger or airsoft gun when not in use.
Always charge batteries in a safe area, on a stable non-flammable, heat-resistant, and non-conductive surface away from other flammable items. Unsafe charging surfaces include, but not limited to, car seats, carpet, bed, or something similar that can heat up quickly and melt or catch fire.
Never allow your battery and charger to be dislodged or fall during charging as this can result in fire, personal injury and property damage.
Never alter, modify or open your battery pack or charger.
Terminate charging immediately when any malfunction is observed.
 
Cancer and Reproductive Harm - www.P65Warnings.ca.gov 
 
CAUTION
Before charging complete a visual inspection of your battery and charger. At the sign of any damage or short circuit, do not use.
Never expose batteries to temperatures higher than 160 degrees F.
Never leave your battery in a closed vehicle.
Never use any charger accessory, such as wires extensions, adapters, or multi-connector adapters, that were not included with your charger from the factory. They may not be compatible with your charger and result in fire, property damage, or personal injury.
Any service or modification of any battery must be completed by a qualified dealer or original manufacturer.
Always keep your battery in a safe secure location to prevent damage during transport or storage.
Always keep batteries away from liquids.
Always keep batteries out of the reach of children.
 
Don't charge the following types of batteries:
Lead Acid battery or VRLA.
NiCd, LiPo, LiFe, or Li-ion battery packs.
Non-rechargeable battery (explosion hazard)
Faulty or damaged battery.
Battery pack which consists of different types of cells.
Any other type of battery except for NiMh battery packs.
 
  • Configuration: Split (8 Cells)
  • Dimensions: 2x 115mm x 19mm
  • Plug type: Small Tamiya
  • Specifications: 9.6v / 2200mAh
  • Discharge Rate: 16A maximum
  • Charger: Not Included
 
  • Made of high quality matched NiMH 2/3 A size cells
  • High power delivery
  • No memory effect
  • Slimmer design
For warranty support, service or repair assistance please visit Valken.com and visit our HELP CENTER link.

All sales at Valken.com are considered final. Valken Sports does not issue cash refunds at any time. Valken Sports provides warranty support and service, as well as paid, out-of-warranty repair service and support for Valken-manufactured products in accordance with all current warranty policies as published by Valken Sports. Valken Sports does not service, repair or provide additional warranty for paintball, airsoft or other products not directly manufactured by Valken Sports and all warranty and service claims for all non-Valken products must be directed to the applicable manufacturer in accordance with their individual warranty and service policies.